EFO-3e: tool-based end forming
The end profile is produced with selected tooling. Selection covers geometry, operation sequence and material behaviour.
T-DRILL · End forming
Tube end forming and spinning
The tube end shape determines the processing method. Select tool-based forming or spinning for the required geometry, material and production workflow.
The required shape comes first
Tube end forming covers the production of a defined end geometry. Spinning is one method and uses a rotating tool. Not every end forming process is spinning, and the capabilities of two spinning machines can differ significantly.
SPM-115: flat closing
Spinning intended for flat closing of copper and brass tubes.
SP-110: closing, reducing and expanding
A spinning machine for copper tubes. Each operation has its own conditions and working range.
TCC-45 EF3 / EF8: cutting and forming
Cutting combined with end forming operations in a line. Capacity follows the configuration and tools selected for the workpiece.
T-DRILL catalogue
Models and equipment
Configuration and availability are confirmed during selection.
5 items
Select 2–3 models from the same technology family to compare.
Cutting and end-forming line
TCC-45 EF3
TCC-45 EF3 combines chipless cutting and end forming in one system. Up to three tool strokes can prepare a profile without moving the part to a separate end former.
Cutting and end-forming line
TCC-45 EF8
TCC-45 EF8 combines tube cutting with a cycle of up to eight forming strokes. It allows a more complex end profile to be planned within one line.
Tube end-forming machine
EFO-3e
EFO-3e performs up to three forming strokes in a programmed cycle. Electric servo drives and tools selected from the drawing produce the required tube end profile.
Spinning machine
SPM-115
SPM-115 closes the ends of copper and brass tubes with a flat profile. An electric servo drive follows the programmed cycle while a rotating tool forms the stationary tube.
Spinning machine
SP-110
SP-110 is a spinning machine for copper tubes. The selected tool defines the end shape; capacity is checked separately for closing, reducing and expanding.
No results. Change the name or filter.
Selection with TARGA
What should you prepare?
- End drawing before and after forming, tolerances and processing zone length.
- Material and condition, outside diameter and wall thickness.
- Required leak tightness, finish and end function in the finished product.
- Complete tube shape, end access and any need to integrate cutting.
Before you choose
Is a spinning machine the same as an end former?
End forming is the broader term. A spinner performs a specific process with a rotating tool; an EFO machine forms ends with selected tooling.
Which model is intended for flat closing?
SPM-115 is intended for flat closing of copper and brass tubes. Feasibility for a specific closure is confirmed from the material and workpiece requirements.
Can spinning replace a separate end cap?
In a suitable application, a closure can be formed from the tube material. The required shape, leak tightness and operating conditions need assessment and appropriate part acceptance.