T-DRILL · Collaring
S-80Programmed manifolds. Automatic tool changes.
S-80 combines collaring with a tool magazine and automatic tube positioning in the AFT configuration. It suits repeat production where successive branches have different positions and diameters.
Selection, implementation and support in Poland — TARGA.
Steel Ø12–101.6 mmcollaring range
Cu/Al Ø6–104 mmcollaring range
Up to Ø114.3 mmrun tube
AFToptional feeding
From workpiece to process
From workpiece setup to a programmed cycle
The operator selects the programme and tools, then prepares the tube. The AFT system moves the workpiece between positions, while the magazine changes tools for successive operations. Loading and unloading are agreed for the specific workstation.
Automatic tool changes
The 5 magazine positions hold the tools needed for the manifold programme. The number of positions is not the total number of possible diameters.
Tube positioning
The AFT table moves and rotates the workpiece. Its length and clamping are selected for production.
Stored programmes
Programming supports repeat batches while retaining the correct conditions for the tools and material.
How does the process work?
Programme and clamping
Select the programme and tools, then prepare the tube on the table.
Automatic processing
The system positions the tube and changes the tools required for each branch.
Unloading and inspection
At the end of the programme, the part returns to the unloading position. Inspection requirements follow the joint specification.
Working range
Specifications and selection conditions
| Collaring — steel | Ø12–101.6 mm O.D. |
|---|---|
| Collaring — copper and aluminium | Ø6–104 mm |
| Run tube | Up to Ø114.3 mm; SCH 10 |
| Rated power | 10 kW |
| Air consumption | 150 Nl/min |
| Basic unit weight | 1200 kg |
| AFT — option | Version for 6 m tubes |
Configuration
Equipment selected for production
Selection covers the AFT table, tools, clamps, tube supports and workpiece handling. The photograph shows a workstation with a table and guarding. Space requirements are based on the complete configuration layout.
Machine and workpiece
Manufacturer resources
Brochures describe configurations from the stated edition. We confirm the offered scope for your workpiece.
Watch the equipment in operation
Manufacturer videos may show optional equipment. Playing a video connects to YouTube.
What do we need for selection?
Send manifold dimensions, material, wall thicknesses, branch positions and quantities. We will use these to select the tools and table.
Before you choose
Is S-80 limited to Ø80 mm branches?
No. The manufacturer specifies Ø12–101.6 mm for steel and Ø6–104 mm for copper and aluminium.
Can all maximum values be combined?
No. Material, both diameters, wall thickness and tooling must be selected together.
Explore related solutions
Industrial machine
S-56
S-56 prepares branches for welded and brazed joints. The cycle is selected for the joining method, material and tube geometry, from a stand-alone workstation to a configuration with a feeding system.
Industrial machine
SEC-115
SEC-115 combines collaring with automatic tool changes. It provides a starting point for manifold production with multiple branches, different diameters and repeatable positions along the tube.